On-spot repair when you spill water on your laptop

On-spot repair when you spill water on your laptop

On-spot repair when you spill water on your laptop
5 (100%) 17 votes

Water or any kinds of liquid are all harmful to electronic devices, especially smart devices such as smart phone, tablet and laptop. In that case, immediate repair is highly recommended, or else the problem will get worse and worse. In this article hereby, we are going to show you some necessary steps to deal with water spill on your own laptop. Take a look!

On-spot repair when you spill water on your laptop

Turn off your laptop immediately after the liquid has spilled

Step 1: Turn off your laptop!

If you happen to spill water or other kinds of liquid on your laptop, stop using it immediately even though it may function properly. To start to repair, turn it off, unplug all the devices that are connecting to your laptop, including the AC adapter, headphone, mouse, speaker, etc…., then remove the battery or any other removable equipment and turn your computer up side down in order to get rid of as much liquid as possible.

stop using it immediately even though it may function properly

Clean the liquid right away.

Step 2: Inspect the liquid presence inside your laptop and clean it up

If there is no more liquid coming out from your laptop, put it back to the right position, then use a soft cloth or tissue to clean up the water that remains on the surface of your device. That’s for the liquid outside, now you have to take care of the liquid inside your laptop. The next thing you are supposed to do is remove the keyboard, turn it upside down and clean up the water left on the other side with a tissue or dry it up with an air compressor. Now if you don’t see any water left inside the laptop (or your laptop has a water-resistant layer), put the keyboard back to its position, plug in the AC adapter then restart your laptop to see if it works properly or not. If so, problem solved. If not, have your keyboard repaired by specialists or buy a new one.

Inspect the liquid presence inside your laptop

Disassemble your laptop and clean to the last drop of your laptop component

Another more complicated case is when the liquid is on the mainboard. In this case, you have to entirely disassemble your laptop to pieces. If you do not know how to do this step, go to the laptop repair center. If you think you can, follow our instruction carefully. First, remove the CPU, RAM and other removable things from the mainboard. Then use a smooth toothbrush or tissue along with 91%-99% isopropyl alcohol to clean up all liquid left insides. You have to be very careful during this step or else you may manipulate tiny components on the mainboard, which leads to much more serious hardware error.

liquid is on the mainboard

After ALL components inside your laptop is clean and dry from liquid, start to assemble each components back to the mainboard.

Step 3: Assemble your laptop

After ALL components inside your laptop is clean and dry from liquid, start to assemble each components back to the mainboard. Make sure your put everything back to its right position, plug in the right ports. Before you assemble the outer layer of the laptop, plug in the AC the adapter and restart your laptop to check if it gets back to normal state or not. If it does, your laptop is ready to use. If not, examine the mainboard again to look for hidden water spill or bring the mainboard to repair shop.

In the worst case, you have to replace the old mainboard or opt for other  laptops. There is always some place to replace your computer, and we can also you some newest, cheapest laptops in town to replace your broken from liquid one.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: